Racks
SCOOTER MOTIQUE'  |     home or back to                                                     
                                                  
Tilt-a-Rack





Racks

Tilt-a-Rack Motorcycle Racks

Tilt-a-Rack Motorcycle Racks

Rack your Motorcycle or Scooter in seconds!

1. Just hook up the rack to your 2" receiver hitch, pull out the extension, and unlatch the tilt.

2. Push the Motorcycle up the rack, and the rack latches level.

3. Tie it down, push in the extension, and you're ready to go!
(While the other guys are still trying to maneuver their trailers and pulling out the ramps).
Model 210CR - 410CR - 610CR - Dirt Bike Tilt-a-Rack®

A 1-place tilt-able Motorcycle carrier that hitches to a frame-mounted 2" class III or better receiver hitch. They are designed for transporting a wide range of Motor Cross, Enduro, and other off-road bikes, all the way from pocket bikes (est. 54 lbs) to the big scramblers up in the 400 lb. range. The wheel channel is 6' long x 5" wide.

These racks allows you to carry your Motorcycle behind the smaller space used by sports vehicles because they are very light. You hardly realize it is back there. Buy these Tilt-a-Rack® racks from us now by clicking on the 'Add To Cart' button below!

Model 722BK

A handy add-on section to the 410CR, making it a 2-place cycle carrier. If the 410CR is purchased with the intentions of adding the other half later, the 720CR tongue-weight limitations for the host vehicle and receiver hitch must be noted. Buy these Tilt-a-Rack® racks from us now by clicking on the 'Add To Cart' button below!

Model 720CR*

A Two-place cycle Tilt-a-Rack® allows two motorcycles, with a combined weight of up to 700 lbs., to be easily carried behind your vehicle. It has two individual tilting decks that tilt in opposite directions. This balances the load and allows for a more compact rack where the handlebars don't get in each other's way.

You get a lot of carrying power and free your pickup bed for all your other necessities. Get it now, and you'll be ready for all the upcoming rallies!

*Note: Because of the additional tongue weight, attach Model 720CR  Tilt-a-Rack® to a heavier vehicle, ½ ton or greater, and use a class IV or V hitch.

SPECIFICATIONS:

Model Max WT Carried Other Features Usable Dimensions Outside Dimensions Weight Shipped WT
210CR
1-Place Mini Cycle Rack
200 lbs. 12" from receiver to edge of rack 60"x5"x2" N/A 65 lbs. Shipped in 1 Box
410CR
1-Place Cycle Rack
400 lbs. 18" from receiver to edge of rack 72"x5"x2" N/A 78 lbs. Shipped in 1 Box
610CR
1-Place Sport Bike Rack
600 lbs. 17" from receiver to edge of rack 84"x7"x2" N/A 130 lbs. Shipped in 1 Box
720CR
2-Place Cycle Rack W/Light Kit
700 lbs. 18" from receiver to edge of rack 72"x5"x2" N/A 153 lbs. Shipped in 1 Box
722BK
Add-on for 410CR W/Light Kit
700 lbs. 18" from receiver to edge of rack 75"x5"x2" N/A 90 lbs. Shipped in 1 Box


Shipped via UPS Ground

Model 210CR - $234.99
Model 410CR - $289.99
Model 610CR - $334.99
Model 720CR - $398.99
Model 722CR - $239.99 (CR or BK)




Copyright 2007, Pique Motorsport, Scooter Motique, All rights reserved.
All other product and company names are the properties of their respective owner.